Clayborn Lab Delivers Reliability and Consistency
TSE Industries chose Clayborn Lab to build high-pressure heated hoses to spray our environmentally-preferred EcoSpray® resin onto spas, hot tubs and other products as a replacement for Styrene-Ester. It is important that our customers receive top quality, reliable products that perform consistently and Clayborn has delivered.
— Ryan Rindone
TSE Industries, Inc., Clearwater, FL
Hot Tube
Heat Tape
| -16 Series / Silicone PSA | -28 Series / Acrylic PSA | |||
|---|---|---|---|---|
| 50 ft. roll | 100 ft. roll | 50 ft. roll | 100 ft. roll | |
| 1/6” wide 1 conductor | $85 | $125 | $90 | $140 |
| 1/4” wide 2 conductor | $90 | $140 | $100 | $150 |
| 1/2” wide 4 conductor | $135 | $230 | $150 | $250 |
To order: Specifty resistance code letter, Silicone or Acrylic and number of conductors (i.e. H-16-2, B-28-4). Quantity discounts on 500 or more feet of a single type.
| Hot Tube Only | Hot Tube with Heat Shrink | Heavy Duty Hot Tube with insulation and nylon braid |
Industrial Strength with insulation and silicone jacket |
|
| 1/4” O.D. unfinished | $8 / ft. | $10 / ft. | $12 / ft. | $22 / ft. |
| 3/8” O.D. unfinished | $8 / ft. | $11 / ft. | $13 / ft. | $25 / ft. |
| 1/2” O.D. unfinished | $9 / ft. | $12 / ft. | $14 / ft. | $27 / ft. |
| 5/8” O.D. unfinished | $11 / ft. | $14 / ft. | $16 / ft. | $30 / ft. |
| 3/4” O.D. unfinished | $12 / ft. | $14 / ft. | $19 / ft. | $32 / ft. |
| 1” O.D. unfinished | $15.50 / ft. | $18 / ft. | $24 / ft. | $39.50 / ft. |
Each Hot Tube is electrically engineered and designed for our customer’s requirements. Above pricing does NOT include customer-specified tubing. Additional charge of $90.00 for electrical terminations on both ends. Some options include:
| Thermocouple | $25 |
| Strain Relief | $50 |
| Embedded RTD | $50 |
| Pre-set Thermostat | $40 |
| Temperature Indicator Light | $35 |
Call for a quotation on any custom feature, including Tube-in-a-Tube, Multiple Tubes, Armored Ends, Fire Retardant Outer Braid or other innovative options. Standard lead time is 10 business days after receipt of order. Expedited orders may be available for a 15% upcharge. Tubing that is hand-wrapped may have an additional charge.
Custom Tape Heaters
| 4-Conductor Silicone | $2.70 / ft. + $20 |
| 2-Conductor Silicone | $1.80 / ft. + $20 |
| 4-Conductor Acrylic | $3 / ft. + $20 |
| 2-Conductor Acrylic | $2 / ft. + $20 |
| 1-Conductor Silicone | $1.70 / ft. + $20 |
| 1-Conductor Acrylic | $1.80 / ft. + $20 |
| Add Thermostat | $40 each heater installed |
| Thermostat – not installed | $20 each |
| Double Dielectric | Add 15% of tape/ft. price |
| 6-Wire Tape | Add 15% of tape/ft. price |
| Standard 2’ Leads – over 2’ | Add $1/ft. (for both leads) |
| 3-Prong Plug | No extra charge |
Silicone
Rubber Sealant
| 2.8 oz Tube | $10 / each |
Self fusing
Silicone Tape
| 2” x 12 yards | $30 / roll |
Terminals
| 1-99 Pieces | 100-249 pieces | |||
| Small* | Large* | Small* | Large* | |
| T-1 (1 lead wire) | $2 | $2.50 | $1.75 | $2 |
| T-2 (2 lead wires) | $3 | $3.50 | $2.75 | $3 |
* When ordering, specify whether for large (16-20 gauge) or small (22-26 gauge) power lead wire. The necessary solderless crimp connectors for use with these terminals are included. Additional crimp connectors: #092 (22-26 gauge) or #345 (16-20 gauge) $.25 each.
Overwrap / Heat Transfer Tape
| 3/4" x 27 ft. | 1 1/4" x 27 ft. | |
| #7 Aluminum / Acrylic PSA | $27 | $33 |
| #8 Aluminum / Silicone PSA | $25 | $30 |
© Clayborn Lab, 2010. All Rights Reserved.
